To create a grounded Faraday Cage:
1) Connect tent panels, frame (using the Velcro snap), and bamboo mat sections together by installing the short snap cables
1) Connect the long grounding cable to any unused snap and plug into the ground pin of a wall outlet
3) Connect each item together in a linear series (Daisy Chain).
Due to the quantity of male snaps, there is no right or wrong order of installing the snap cables. Just make sure that each panel, frame, and mat section are all linked together with cables. Most of the bamboo mat snaps are underneath along the edges so the cables do not create lumps to walk on. Two snaps are on the top side of the bamboo mat so you can connect one with a tent panel and the other to the ground of the wall outlet. Again, there is no right or wrong order for installing the cables.
