REFRESH diffuses the gas into the water and routes the off-gas through a catalyst; the generator that makes the gas is yours
The Tri-OXY REFRESH Ozone Diffuser and Degassing Kit does not generate ozone. It is a patented diffuser and catalytic degassing system that works with compatible ozone generators from multiple brands. With the Tri-Oxy FRESH generator sold out and not returning, the REFRESH kit at $219.99 is the Creatrix piece for anyone who already owns a generator.
Preparing ozonated water involves 2 physical processes, and the REFRESH page separates them. First, ozone gas has to be dispersed through the water. Second, ozone that does not dissolve rises out of the water as off-gas. A basic diffuser handles only the first of the 2. REFRESH pairs a 50 to 60 micron SS-316 stainless steel diffuser with a vented degassing container and catalyst, so excess ozone leaving the water passes through the catalyst bed, where it is converted toward oxygen, before it exits the system.
The page states that the share of gas that dissolves depends on 7 variables: generator output, bubble size, water depth, temperature, dissolved minerals, organic load and operating time. Without degassing equipment, excess ozone is released into the room. The kit is made of Class A ozone-resistant and food-grade materials, and its product attributes list the voltage as Any and the compatibility as International.
The page gives 3 checks before you use REFRESH with another brand. Check the outlet size: the generator outlet and the silicone tubing must make a secure connection. Check the gas output: the generator's output should be appropriate for the jar size and the intended use. Follow both manuals: the generator's operating instructions and the REFRESH assembly instructions both apply.
The kit jar is 1000 ml. The run time comes from the generator's instructions for the application, and the page states that the water is used promptly after the cycle. The FAQ answers the compatibility question directly: REFRESH works with other generator brands when the outlet, the tubing connection, the gas output and the intended water use are compatible. The Tri-Oxy REION is being developed as the FRESH replacement, planned to combine 800 mg/hr ozone generation with a separate plasma-ion air purification function.
Assembly has 4 steps: fill the glass jar, connect the silicone tubing between the generator and the diffuser, install the degasser with its screen, filter, catalyst, seals and vented cap in place, and run the generator for the time the application calls for. The fill step carries the one measurement in the setup: leave approximately 2 inches between the water level and the blue filter container.
The reason is the catalyst. The page states that the catalyst pellets, the fabric filter and the screen must stay dry for proper airflow and degassing, and that the water must never touch the blue degassing container. Overfilling, tipping, foaming or splashing can push water into it.
A wet catalyst bed restricts airflow and reduces how much of the ozone it converts toward oxygen. The page's recovery has 4 steps: turn off the ozone generator before taking anything apart, remove the catalyst pellets, the screen and the fabric filter from the container, lay every part out separately until each is completely dry, and reassemble them in the correct order before the next use.
The kit includes 70 grams of catalyst, which the page estimates will last up to 10 years under appropriate dry operating and storage conditions. Its 4 care rules are keep it dry, keep oils, cleaning chemicals, dust and foreign material out of the catalyst bed, keep the vent, screen and filter installed and clear, and inspect the catalyst, filter, screen, seals and cap periodically. If you smell ozone near the system, the instruction is to stop and check the seals, cap, screen, filter, catalyst placement, tubing, water level and room ventilation. The diffuser is dried after every use by keeping gas flowing through it out of the water until the pores are clear.
The kit holds 11 components: a vented cap, a cap O-ring, a cap seal, the degassing container, a container seal, a container filter, a container screen, 70 grams of catalyst, a 1000 ml glass jar and lid, a silicone tube, and the SS-316 diffuser with its 50 to 60 micron pore range. The page notes a printing correction: some boxes or instructions refer to a 0.5 micron diffuser, and the included diffuser is the 50 to 60 micron SS-316 diffuser.
The diffuser is also sold separately as the $19.99 Ozone Diffuser Stone with Stainless Steel Barb, for replacement. The kit is for water; the page does not recommend its diffuser for oil. The page's rule: do not intentionally inhale ozone gas, and keep ozone away from the breathing zone.
REFRESH adds the fine-bubble diffuser, the jar and the catalytic degassing chamber to a compatible ozone generator.
Practitioner Eileen Durfee, NBS (Nutritional Balancing Science), NASM-CPT, is a wellness educator, inventor and author with 10 US and 6 international patents, 9 of the 10 US patents commercialized.
The REFRESH page lists the ozone kit as patented and designed in the USA by Practitioner Eileen Durfee.
No. It is a diffuser and degasser and needs a compatible ozone generator.
Yes, when the generator outlet, tubing connection, gas output and intended water use are compatible.
So water does not reach and wet the catalyst, screen and fabric filter in the blue degassing container.
Turn off the generator, remove the catalyst, screen and filter, dry every part completely, and reassemble in the correct order.
The 70 grams of catalyst is estimated to last up to 10 years when kept dry.
Published November 17, 2026 • Updated November 17, 2026
By Eileen Durfee, NBS, NASM-CPT, inventor and wellness educator.
This article is for educational purposes only. These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure or prevent any disease. Nuco Enterprise Solutions LLC.
